Difference between revisions of "TUFLOW Message 2444"
Jump to navigation
Jump to search
Steph.dufour (talk | contribs) |
|||
| Line 8: | Line 8: | ||
|link3='' | |link3='' | ||
|link4='' | |link4='' | ||
| − | |prelink=[[ | + | |prelink=[[TUFLOW_Message_2441|Message 2441]] |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_2445|Message 2445]] | |nextlink=[[TUFLOW_Message_2445|Message 2445]] | ||
}} | }} | ||
Revision as of 14:16, 4 October 2018
TUFLOW Message
ERROR 2444 - ????
Alternate Message
WARNING 2444 - ????
Description
An ERROR (2012-05 TUFLOW release) or a WARNING (if Defaults==pre-2012) is issued if a final zpt elevation less than zmin or greater than zmax as defined by the command Zpt Range Check has been found.
Suggestions
Import in the messages.MIF/.SHP file and check for erroneous zpt elevations outside of the ranges for zmin and zmax. If these have not been manually defined using the command Zpt Range Check, the default values are -9998 for zmin and 99998 for zmax.
| Up |
|---|
 2xxx Messages
|