HEC-RAS to TUFLOW: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Chris Huxley (talk | contribs) No edit summary |
Chris Huxley (talk | contribs) No edit summary |
||
| Line 5: | Line 5: | ||
=HEC-RAS Geometric Data to TUFLOW Conversion (sdf_to_GIS.exe)= |
=HEC-RAS Geometric Data to TUFLOW Conversion (sdf_to_GIS.exe)= |
||
This utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include: |
|||
- 1D centerline GIS information |
|||
- Cross section GIS locations |
|||
- Cross-section data in csv format |
|||
The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format. |
|||
Revision as of 03:47, 5 February 2015
Introduction
This page contains a brief introduction to the methods of converting HEC-RAS model inputs into a format which compatible with TUFLOW.
If you have any suggestions to be included in these pages, please email support@tuflow.com.
HEC-RAS Geometric Data to TUFLOW Conversion (sdf_to_GIS.exe)
This utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include: - 1D centerline GIS information - Cross section GIS locations - Cross-section data in csv format The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format.