Difference between revisions of "HEC-RAS to TUFLOW"
Jump to navigation
Jump to search
Chris Huxley (talk | contribs) |
Chris Huxley (talk | contribs) |
||
| Line 8: | Line 8: | ||
<li> Cross section GIS locations | <li> Cross section GIS locations | ||
<li> Cross-section data in csv format | <li> Cross-section data in csv format | ||
| − | < | + | </ol> |
The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format. | The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format. | ||
| − | =HEC-RAS DSS Data to TUFLOW Conversion (coming soon)= | + | = HEC-RAS DSS Data to TUFLOW Conversion (coming soon)= |
Revision as of 03:51, 5 February 2015
Introduction
This page contains a brief introduction to the methods of converting HEC-RAS model inputs into a format which compatible with TUFLOW. If you have any suggestions to be included in these pages, please email support@tuflow.com.
HEC-RAS Geometric Data to TUFLOW Conversion (SDF_to_GIS.exe)
This utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include:
- 1D centerline GIS information
- Cross section GIS locations
- Cross-section data in csv format
The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format.