Difference between revisions of "HEC-RAS to TUFLOW"
Jump to navigation
Jump to search
Chris Huxley (talk | contribs) |
Chris Huxley (talk | contribs) |
||
| Line 11: | Line 11: | ||
The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format. | The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format. | ||
| + | |||
| + | == Input Processing == | ||
| + | |||
| + | == Example Utility Syntax == | ||
| + | |||
| + | == Utility Output == | ||
= HEC-RAS DSS Data to TUFLOW Conversion (coming soon)= | = HEC-RAS DSS Data to TUFLOW Conversion (coming soon)= | ||
Revision as of 03:53, 5 February 2015
Introduction
This page contains a brief introduction to the methods of converting HEC-RAS model inputs into a format which compatible with TUFLOW. If you have any suggestions to be included in these pages, please email support@tuflow.com.
HEC-RAS Geometric Data to TUFLOW Conversion (SDF_to_GIS.exe)
This utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include:
- 1D centerline GIS information
- Cross section GIS locations
- Cross-section data in csv format
The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format.