HEC-RAS to TUFLOW: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Chris Huxley (talk | contribs) |
Chris Huxley (talk | contribs) |
||
| Line 5: | Line 5: | ||
The SDF_to_GIS.exe utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include: |
The SDF_to_GIS.exe utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include: |
||
<ol> |
<ol> |
||
<li> |
<li> Creek centerline location data in GIS format |
||
<li> Cross section GIS |
<li> Cross section locations in GIS format |
||
<li> Cross-section data in csv format |
<li> Cross-section data in csv format |
||
</ol> |
</ol> |
||
The GIS format typye can be either *mif or *shp. Options are also available to automatically trim the processed cross-section GIS and csv data to the main channel region between defined levee markers. |
|||
The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format. |
The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format. |
||
Revision as of 03:57, 5 February 2015
Introduction
This page contains a brief introduction to the methods of converting HEC-RAS model inputs into a format which compatible with TUFLOW. If you have any suggestions to be included in these pages, please email support@tuflow.com.
Geometric Conversion (SDF_to_GIS.exe)
The SDF_to_GIS.exe utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include:
- Creek centerline location data in GIS format
- Cross section locations in GIS format
- Cross-section data in csv format
The GIS format typye can be either *mif or *shp. Options are also available to automatically trim the processed cross-section GIS and csv data to the main channel region between defined levee markers.
The HEC-RAS model inputs need to be in SDF format, and must be geo-referenced using a real world projection. SDF format is an HEC-RAS export format.