Difference between revisions of "HEC-RAS to TUFLOW"
Jump to navigation
Jump to search
Chris Huxley (talk | contribs) |
Chris Huxley (talk | contribs) |
||
| Line 5: | Line 5: | ||
The SDF_to_GIS.exe utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include: | The SDF_to_GIS.exe utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include: | ||
<ol> | <ol> | ||
| − | <li> | + | <li> Centerline location data in GIS format |
| − | <li> Cross section locations in GIS format | + | <li> Cross-section locations in GIS format |
<li> Cross-section data in csv format | <li> Cross-section data in csv format | ||
</ol> | </ol> | ||
Revision as of 04:00, 5 February 2015
Introduction
This page contains a brief introduction to the methods of converting HEC-RAS model inputs into a format which compatible with TUFLOW. If you have any suggestions to be included in these pages, please email support@tuflow.com.
Model Geometry Conversion (SDF_to_GIS.exe)
The SDF_to_GIS.exe utility converts HEC-RAS geometric data data into TUFLOW compatible GIS and csv input format. The utility outputs include:
- Centerline location data in GIS format
- Cross-section locations in GIS format
- Cross-section data in csv format
The GIS format type can be either *mif or *shp. Options are also available to automatically trim the processed cross-section GIS and csv data to the main channel region between defined levee markers. The HEC-RAS model inputs need to be in SDF format (HEC-RAS export format), and must be geo-referenced using a real world projection.