Difference between revisions of "TUFLOW Message 2034"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=Trying to apply a 1D (HX) link to a 2D cell already assigned another type of boundary or link. | |message_desc=Trying to apply a 1D (HX) link to a 2D cell already assigned another type of boundary or link. | ||
| − | |suggestions= | + | |suggestions=Seperate incompatible boundary types, for example a single 2D cell cannot be both a water level boudary and a flow boundary. |
|discussion_page=* [[Talk:TUFLOW Message 2034|Discuss Message 2034]] | |discussion_page=* [[Talk:TUFLOW Message 2034|Discuss Message 2034]] | ||
|link3='' | |link3='' | ||
Revision as of 16:57, 6 February 2011
TUFLOW Message
ERROR 2034 - Trying to apply a 1D (2D HX) link to a 2D cell already assigned another boundary or link.
Alternate Message
NA
Message Type
ERROR
Description
Trying to apply a 1D (HX) link to a 2D cell already assigned another type of boundary or link.
Suggestions
Seperate incompatible boundary types, for example a single 2D cell cannot be both a water level boudary and a flow boundary.
| Up |
|---|
 2xxx Messages
|