Difference between revisions of "TUFLOW Message 2078"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=CHECK 2078 - End of 3D TIN breakline is dangling. <br> CHECK 2078 - End of 3D line is dangling. | |alt_msg=CHECK 2078 - End of 3D TIN breakline is dangling. <br> CHECK 2078 - End of 3D line is dangling. | ||
|type=[[CHECK]] | |type=[[CHECK]] | ||
| − | |message_desc=End of 3D breakline is dangling. | + | |message_desc=End of 3D breakline is dangling. HX breakline does not have an elevation point at the end of the line, nearest point to the end of the line is used. |
| − | |suggestions= | + | |suggestions=Check elevation at start of HX breakline, if none specified closest elevation point is used. |
|discussion_page=* [[Talk:TUFLOW Message 2078|Discuss Message 2078]] | |discussion_page=* [[Talk:TUFLOW Message 2078|Discuss Message 2078]] | ||
|link3='' | |link3='' | ||
Revision as of 19:28, 14 February 2011
TUFLOW Message
CHECK 2078 - End of 3D HX breakline is dangling.
Alternate Message
CHECK 2078 - End of 3D TIN breakline is dangling.
CHECK 2078 - End of 3D line is dangling.
Message Type
CHECK
Description
End of 3D breakline is dangling. HX breakline does not have an elevation point at the end of the line, nearest point to the end of the line is used.
Suggestions
Check elevation at start of HX breakline, if none specified closest elevation point is used.
| Up |
|---|
 2xxx Messages
|