Revision as of 11:56, 1 October 2010 view source tuflow>Par No edit summary ← Older edit		Revision as of 09:31, 15 February 2011 view source tuflow>Par No edit summary Newer edit →
Line 1: {{TUFLOW_Message \|tuflow_message=ERROR 2085 - "Read MID Mat" or "Read MID CnM" cannot be used with "Bed Resistance Cell Sides == INTERROGATE \|alt_msg=ERROR 2085 - Read MID Grid command cannot be used with Bed Resistance Cell Sides == INTERROGATE \|type=[[ERROR]] \|message_desc=<font color="green""><tt>Read MID Mat""</tt></font>, <font color="green"><tt>Read MID CnM""</tt></font> or <font color="green"><tt>Read MID Grid""</tt></font> .tgc commands cannot be used with <font color="green"><tt>Bed Resistance Cell Sides == INTERROGATE""</tt></font> .tcf command. Specify <font color="green"><tt>Bed Resistance Cell Sides == AVERAGE n""</tt></font> or <font color="green"><tt>Bed Resistance Cell Sides == AVERAGE M""</tt></font> or <font color="green"><tt>Bed Resistance Cell Sides == MAXIMUM n""</tt></font> in the .tcf file."<br> ~~\|suggestions=????~~ <font color="green"><tt>Bed Resistance Cell Sides == INTERROGATE</tt></font> is the default in the TUFLOW (as of TUFLOW Build 2007-07-AA), applies the exact value from the material polygons at each cell side. With the <font color="green"><tt>Read MID</tt></font> commands a value is inputted for each cell and value at cell side calculated using either average n, average M (1/n) or maximum n. The two approaches are therefore incompatible. \|suggestions=Specify an interpolation method for cell sides (<font color="green"><tt>Bed Resistance Cell Sides == </tt></font>) if using <font color="green"><tt>Read MID</tt></font> commands to define roughness. Or use GIS inputs (<font color="green"><tt>Read GIS MAT or CnM or FRIC == )</tt></font> with <font color="green"><tt>Bed Resistance Cell Sides == INTERROGATE</tt></font>. \|discussion_page=* [[Talk:TUFLOW Message 2085\|Discuss Message 2085]] \|link3=''

TUFLOW Message 2085: Difference between revisions