Difference between revisions of "TUFLOW Message 0038"
Jump to navigation
Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 0038 - Could not apply Set IWL == AUTO due to varying 2D HT boundary. |alt_msg=NA |type=ERROR |message_desc=If using the <tt>Set IWL...") |
|||
| Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
| − | |tuflow_message=ERROR 0038 - Could not apply Set IWL == AUTO due to varying 2D HT boundary. | + | |tuflow_message=ERROR 0038 - Could not apply <font color="blue"><tt>Set IWL </tt></font><font color="red"><tt>== </tt></font> AUTO due to varying 2D HT boundary. |
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=If using the <tt>Set IWL == Auto</tt> feature, the IWL in the model is automatically set based on the water level at the downstream boundary. In this a varying HT boundary in the 2D model has been used and TUFLOW is unable to set the IWL automatically. | + | |message_desc=If using the <tt><font color="blue">Set IWL </font><font color="red">== </font> Auto</tt> feature, the IWL in the model is automatically set based on the water level at the downstream boundary. In this a varying HT boundary in the 2D model has been used and TUFLOW is unable to set the IWL automatically. |
| − | |suggestions=Ensure that only a single water level boundary is used or remove the <tt>Set IWL == Auto</tt> command and set the IWL manually using the <tt>Set IWL == <value>, Read GIS IWL == <gis layer> or Read Grid IWL == <grid dataset></tt> commands. | + | |suggestions=Ensure that only a single water level boundary is used or remove the <tt><font color="blue">Set IWL </font><font color="red">== </font> Auto</tt> command and set the IWL manually using the <tt><font color="blue">Set IWL </font><font color="red">== </font> <value>, <font color="blue">Read GIS IWL </font><font color="red">== </font> <gis layer> or <font color="blue">Read Grid IWL </font><font color="red">== </font> <grid dataset></tt> commands. |
|discussion_page=* [[Talk:TUFLOW Message 0038|Discuss Message 0038]] | |discussion_page=* [[Talk:TUFLOW Message 0038|Discuss Message 0038]] | ||
|link3='' | |link3='' | ||
Revision as of 13:50, 21 June 2022
TUFLOW Message
ERROR 0038 - Could not apply Set IWL == AUTO due to varying 2D HT boundary.
Alternate Message
NA
Message Type
ERROR
Description
If using the Set IWL == Auto feature, the IWL in the model is automatically set based on the water level at the downstream boundary. In this a varying HT boundary in the 2D model has been used and TUFLOW is unable to set the IWL automatically.
Suggestions
Ensure that only a single water level boundary is used or remove the Set IWL == Auto command and set the IWL manually using the Set IWL == <value>, Read GIS IWL == <gis layer> or Read Grid IWL == <grid dataset> commands.
| Up |
|---|
 0xxx Messages
|