1D Open Channels: Difference between revisions
Rohan.king (talk | contribs) |
Rohan.king (talk | contribs) |
||
| Line 16: | Line 16: | ||
<font color="blue"><tt>Read GIS Table Links</tt></font> <font color="red"><tt>==</tt></font><tt>..\model\mi\1d_xs_xxxxx.MIF</tt> ! corresponding cross-section polylines <br> |
<font color="blue"><tt>Read GIS Table Links</tt></font> <font color="red"><tt>==</tt></font><tt>..\model\mi\1d_xs_xxxxx.MIF</tt> ! corresponding cross-section polylines <br> |
||
<br> |
<br> |
||
The tutorial model [[Tutorial_Module04 here]] runs through the necessary layers and setup for a 1D open channel within a model. |
The tutorial model [[Tutorial_Module04 | here]] runs through the necessary layers and setup for a 1D open channel within a model. |
||
<br> |
<br> |
||
Revision as of 23:56, 9 February 2016
Page Under Construction
Introduction
Open waterways (channels) are most commonly modelled as "S" type channels, the S signifies a sloping channel that can handle steep, super-critical flows. Open channels can either be modeled as an inertial or non-inertial channel, the latter removes the Courant stability condition and is useful for stabilizing very short S channels with high velocities.
Example of an open channel that could be modelled in 1D
Basic Commands
Within the *.ecf the following commands and files are at a minimum required to a model an open channel:
Read GIS Network ==..\model\mi\1d_nwke_xxxxx.MIF ! network layer containing "S" channel alignments
Read GIS Table Links ==..\model\mi\1d_xs_xxxxx.MIF ! corresponding cross-section polylines
The tutorial model here runs through the necessary layers and setup for a 1D open channel within a model.
Any further questions please email TUFLOW support: support@tuflow.com