Flood Modeller Tutorial Model: Difference between revisions

Content deleted Content added
No edit summary
Line 1:
=Introduction=
The objective of this Flood Modeller – TUFLOW model is to demonstrate the ability of TUFLOW to link to an external 1D scheme and the various methods available in which to create this link. It is designed to supplement existing documentation and assumes the user has some prior knowledge of both the Flood Modeller and TUFLOW software packages.
This tutorial model has been developed by BMT WBM with CH2MHill. Please post comments, requests and feedback to the [[Talk:FM Tutorial Model |Discussion Page]] or contact <font[mailto:support@tuflow.com color="blue"><u>support@tuflow.com</u></font>].
=Requirements=
==Hardware==
Line 7:
==Software==
===TUFLOW===
TUFLOW build 2016-03-AAAB or later is required for this tutorial model. This can be obtained from the [http://tuflow.com/Tuflow%20Latest%20Release.aspx downloads section] of the TUFLOW website. It is recommended that you use the latest release version of TUFLOW, both 32 bit and 64 bit versions are available.
This tutorial model does not require a TUFLOW licence in order to be simulated, and no additional drivers should be required.
===Flood Modeller===
Version 4.02 of Flood Modeller or later is required for this tutorial model. Currently, a valid license for Flood Modeller and the TUFLOW link is required to simulate this tutorial model however we are currently working with CH2MHill to allow for this model to be simulated license free.
===GIS Software===
TUFLOW models typically require access to a GIS, text editor, Microsoft Excel and a results viewer to build, review and visualise a model. Refer to the following Wiki page to view a list of compatible packages. Alternatively, Flood Modeller may be used as a GUI for creating and editing GIS layers in a TUFLOW model and also for visualising the results.