TUFLOW Message 1101: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
|alt_msg=NA |
|alt_msg=NA |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=1D network layers should have the GIS attributes as described in |
|message_desc=1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version). |
||
|suggestions=Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer.<br><br> |
|suggestions=Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer.<br><br> |
||
Check that the layer being read in via the 'Read GIS network == ' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer. |
Check that the layer being read in via the 'Read GIS network == ' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer. |
||
Revision as of 16:04, 31 January 2011
TUFLOW Message
ERROR 1101 - Less than the mandatory 20 1d_nwk attributes found
Alternate Message
NA
Message Type
ERROR
Description
1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version).
Suggestions
Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer.
Check that the layer being read in via the 'Read GIS network == ' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer.
| Up |
|---|
 1xxx Messages
|