Revision as of 00:00, 25 October 2016 view source Andrew.Sims (talk \| contribs) 155 edits No edit summary ← Older edit		Revision as of 02:13, 11 November 2016 view source Rachel (talk \| contribs) 465 edits →Introduction Newer edit →
Line 1: <ol> =Introduction= In this section we will define the bank elevations of the watercourse. These are the elevations of the 1D/2D boundary cells that link the 1D Flood Modeller watercourse to the 2D TUFLOW floodplain. ~~Note that it is these cell elevations that determine whether out of bank flooding occurs and not the left/right bank elevations with the Flood Modeller 1D cross-sections.~~<br> Note that it is these cell elevations that determine whether water spills from the 1D Flood Modeller domain into the 2D TUFLOW domain. The bank elevations of the Flood Modeller 1D cross-sections do not control the spill. =Method=

FM Tute M01 QGIS 1D2D Banks: Difference between revisions