Revision as of 19:27, 27 October 2016 view source Andrew.Sims (talk \| contribs) 155 edits No edit summary ← Older edit		Revision as of 03:35, 11 November 2016 view source Rachel (talk \| contribs) 465 edits →Introduction Newer edit →
Line 1: <ol> =Introduction= In this section we will deactivate the 2D cells where the 1D Flood Modeller component is replacing the 2D solution. The deactivated 2D area should be the same as the area modelled in 1D. This is to ensure that the storage removed from the 2D component of the model is equal to the storage modelled in the 1D component of the model.<br> The deactivated 2D area should be the same as the area modelled in 1D. This is to ensure that the storage removed from the 2D component of the model is equal to the storage modelled in the 1D component of the model. =Method=

FM Tute M01 QGIS 1D2D Code: Difference between revisions