Difference between revisions of "TUFLOW Message 1331"
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
V - Variable Geometry<br> | V - Variable Geometry<br> | ||
W - Weir over the top<br> | W - Weir over the top<br> | ||
| + | Flags can be added after channel type, for example to set a culvert as uni-directional (such a a tide gated culvert) a "CU" type channel is assigned. | ||
For a detailed description of channel flags see Table 4.13 1D Channel and Node Types of the TUFLOW manual (2010 version). | For a detailed description of channel flags see Table 4.13 1D Channel and Node Types of the TUFLOW manual (2010 version). | ||
|suggestions=Remove invalid flags / specify correct flag. | |suggestions=Remove invalid flags / specify correct flag. | ||
Revision as of 15:02, 3 February 2011
TUFLOW Message
ERROR 1331 - Unrecognised flag for channel
Alternate Message
NA
Message Type
ERROR
Description
Flag for channel is unrecognised or invalid for channel type. Vaild flags are:
A - Adjust Stucture Losses
D - Downstream Controlled
F - Fix Sturucture Losses
N - Non-inertial Channel
U - Uni-direction
V - Variable Geometry
W - Weir over the top
Flags can be added after channel type, for example to set a culvert as uni-directional (such a a tide gated culvert) a "CU" type channel is assigned.
For a detailed description of channel flags see Table 4.13 1D Channel and Node Types of the TUFLOW manual (2010 version).
Suggestions
Remove invalid flags / specify correct flag.
| Up |
|---|
 1xxx Messages
|