TUFLOW Message 1422: Difference between revisions
Created page with "{{TUFLOW_Message |tuflow_message=ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for B bridge channel <channel id> |alt_msg=ERROR 1422..." |
Teegan.Burke (talk | contribs) No edit summary |
||
| Line 5: | Line 5: | ||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge). Please refer to the TUFLOW manual for more details on modelling bridges. |
|message_desc=No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge). Please refer to the TUFLOW manual for more details on modelling bridges. |
||
|suggestions=Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute. |
|suggestions=Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute. <br> |
||
Due to the potential for a divide by zero, a zero loss value can not be specified on the 1d_nwk layer if no LC table has been linked. A minimum loss value of 0.01 for B bridges or 0.001 for BB bridges will need to be specified in the 1d_nwk Form_Loss attribute. |
|||
|discussion_page=* [[Talk:TUFLOW Message 1422|Discuss Message 1422]] |
|discussion_page=* [[Talk:TUFLOW Message 1422|Discuss Message 1422]] |
||
|link3='' |
|link3='' |
||
Revision as of 10:16, 2 February 2017
TUFLOW Message
ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for B bridge channel <channel id>
Alternate Message
ERROR 1422 - No pier losses via LC table or 1d_nwk Form_Loss attribute specified for BB bridge channel <channel id>
ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for BB bridge channel <channel id>
Message Type
ERROR
Description
No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge). Please refer to the TUFLOW manual for more details on modelling bridges.
Suggestions
Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute.
Due to the potential for a divide by zero, a zero loss value can not be specified on the 1d_nwk layer if no LC table has been linked. A minimum loss value of 0.01 for B bridges or 0.001 for BB bridges will need to be specified in the 1d_nwk Form_Loss attribute.
| Up |
|---|
 1xxx Messages
|