MIKE Flood to TUFLOW: Difference between revisions
Content deleted Content added
Ellis Symons (talk | contribs) No edit summary |
Ellis Symons (talk | contribs) No edit summary |
||
Line 199:
=Creating a TUFLOW Control File from MIKE21=
The primary run setting to extract from the MIKE21 model is the duration of the simulation. This can be done by following the steps below:
<ol>
<li> Open MIKE Zero
<li> Open the .m21 file through <b>Open</b> (or drag and drop)
<li> Select the tab <b>Basic Parameters</b> >> <b>Simulation Period</b>
<li> You can obtain the start and end dates from this tab which need to be converted to hours for TUFLOW (in the screenshot below, the simulation duration is 3 hours)<br>[[File: MIKE21-Simulation-Period.PNG]]
</ol>
The 2D timestep should be set to an appropriate TUFLOW interval and not copied directly from the MIKE21 model. It also up to the user to consider output types and time series Plot Output (PO) locations. More information on appropriate timestep intervals can be found in Section 14 of the <u>[https://www.tuflow.com/Download/TUFLOW/Releases/2016-03/TUFLOW%20Manual.2016-03.pdf TUFLOW Manual]</u>. Different Map Output types can be found in Section 9.6
=Discussion=
The below are a series of links to discussions that may interest anyone converting a MIKE Flood model to TUFLOW.
* MIKE – TUFLOW terrain and cell difference discussion (coming soon)
* MIKE – TUFLOW result difference discussion (coming soon)
* Discussion on QT and SA boundary selection (coming soon)
| |||