Revision as of 16:46, 19 October 2017 view source Ellis Symons (talk \| contribs) Bureaucrats, Administrators 3,092 edits →1D Boundaries ← Older edit		Revision as of 16:53, 19 October 2017 view source Ellis Symons (talk \| contribs) Bureaucrats, Administrators 3,092 edits →1D Network Conversion (xsGenerator.exe Utility) Newer edit →
Line 224: <li> From this screen you view information on <b>Structures</b> that you can use to populate attributes for any structures in the 1d_nwk TUFLOW layer<br>[[File: MIKE11-nwk11-tablular.PNG\|750px]] </ol> ===TUFLOW Commands=== The 1D network can now be read into the ECF using the following commands: <font color='green'><tt>! Set model 1D network</tt></font><br> <font color='blue'><tt>Read GIS Network</tt></font> <font color='red'><tt>==</tt></font> <tt>..\model\gis\''<1D Network>''.shp</tt><br> <font color='blue'><tt>Read GIS Table Links</tt></font> <font color='red'><tt>==</tt></font> <tt>..\model\xs\''<1D Cross Sections>''.shp</tt> Water Level Lines can also be used to view the 1D results in the 2D mapping. For more explanation on Water Level Lines, please see the <u>[https://www.tuflow.com/Download/TUFLOW/Releases/2016-03/TUFLOW%20Manual.2016-03.pdf TUFLOW Manual]</u>. The command to read in Water Level Lines is as follows: <font color='green'><tt>! Read 1D Water Level Lines</tt></font><br> <font color='blue'><tt>Read GIS WLL</tt></font> <font color='red'><tt>==</tt></font> <tt>..\model\gis\''<1D Water Level Lines>''.shp</tt><br><br> ==1D Boundaries==

MIKE Flood to TUFLOW: Difference between revisions