Revision as of 20:02, 19 October 2017 view source Ellis Symons (talk \| contribs) Bureaucrats, Administrators 3,092 edits →TUFLOW Commands ← Older edit		Revision as of 20:16, 19 October 2017 view source Ellis Symons (talk \| contribs) Bureaucrats, Administrators 3,092 edits →TUFLOW Commands Newer edit →
Line 280: ===TUFLOW Commands=== The following commands can be written into the TCF. There are numerous commands and options that can be written into the TCF, however these are an example of the basic commands and parameters required to run a TUFLOW model. <font color='green'><tt>! Set GIS format and Projection</tt></font><br> <font color='blue'><tt>GIS Format</tt></font> <font color='red'><tt>==</tt></font> <tt>~~..\model\gis\~~''<GIS File Format e.g. SHP or MIF>''</tt><br> <font color='blue'><tt>SHP Projection</tt></font> <font color='red'><tt>==</tt></font> <tt>..\model\gis\''<Projection File>''.prj</tt><br><br> <font color='green'><tt>! Set Model Control Files</tt></font><br> <font color='blue'><tt>Geometry Control File</tt></font> <font color='red'><tt>==</tt></font> <tt>..\model\''<Converted TGC File>''.tgc</tt><br> <font color='blue'><tt>BC Control File</tt></font> <font color='red'><tt>==</tt></font> <tt>..\model~~\gis~~\''<Converted TBC File>''.tbc</tt><br> <font color='blue'><tt>BC Database</tt></font> <font color='red'><tt>==</tt></font> <tt>..\~~model\gis~~bc_dbase\''<Converted bc_dbase File>''.csv</tt><br><br> <font color='green'><tt>! Set Simulation Controls</tt></font><br> Line 298: <font color='green'><tt>! Set Output Controls</tt></font><br> <font color='blue'><tt>Log Folder</tt></font> <font color='red'><tt>==</tt></font> <tt>''<Log Folder location>''</tt><br> <font color='blue'><tt>Output Folder</tt></font> <font color='red'><tt>==</tt></font> <tt>''..\Results\''<Output Folder location>''</tt><br> <font color='blue'><tt>Write Check Files</tt></font> <font color='red'><tt>==</tt></font> <tt>''..\Check\''<Check Folder location>\''\</tt><br> <font color='blue'><tt>Map Output Data Types</tt></font> <font color='red'><tt>==</tt></font> <tt>''<Map Output Data Types e.g. d h V>''</tt><br> <font color='blue'><tt>Start Map Output</tt></font> <font color='red'><tt>==</tt></font> <tt>''<Start Map Output Time in Hours>''</tt><br> <font color='blue'><tt>Map Output Interval</tt></font> <font color='red'><tt>==</tt></font> <tt>''<Map Output Interval in Seconds>''</tt><br> <font color='blue'><tt>Map Output Format</tt></font> <font color='red'><tt>==</tt></font> <tt>''<Map Output Format Types e.g. ASC XMDF>''</tt><br> <font color='blue'><tt>Maximums and Minimums Only For Grids</tt></font> <font color='red'><tt>==</tt></font> <tt>ON</tt> <font color='green'><tt>! Writes maximums only for grid type output formats e.g. asc types</tt><br> =Discussion=

MIKE Flood to TUFLOW: Difference between revisions