Difference between revisions of "TUFLOW Message 2169"

From Tuflow
Jump to navigation Jump to search
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[WARNING]]
 
|type=[[WARNING]]
|message_desc=THICK option not available with MIN or GULLY approach - ignored.
+
|message_desc=THICK option not available with MIN or GULLY approach - ignored. The gully line approach lowers a continous flowpath in the direction of the line. The THICK line modifies all zpts in selected cells (as selected by "cross-hairs" approach), however if diagonal cells are selected this may not lower a continuous flow path.<br>
|suggestions=????
+
 
 +
par??? <u>Insert diagram or diagrams here</u>
 +
|suggestions=Use THICK or GULLY approach but not both.
 
|discussion_page=* [[Talk:TUFLOW Message 2169|Discuss Message 2169]]
 
|discussion_page=* [[Talk:TUFLOW Message 2169|Discuss Message 2169]]
 
|link3=''
 
|link3=''

Revision as of 19:20, 16 February 2011

TUFLOW Message
WARNING 2169 - THICK option not available with MIN or GULLY approach - ignored.

Alternate Message
NA

Message Type
WARNING

Description
THICK option not available with MIN or GULLY approach - ignored. The gully line approach lowers a continous flowpath in the direction of the line. The THICK line modifies all zpts in selected cells (as selected by "cross-hairs" approach), however if diagonal cells are selected this may not lower a continuous flow path.

par??? Insert diagram or diagrams here

Suggestions
Use THICK or GULLY approach but not both.


Up
Go-up.png 2xxx Messages