Difference between revisions of "TUFLOW Message 2170"
| Line 3: | Line 3: | ||
|alt_msg=ERROR 2170 - Exceeded limit of allowable trigger points in a GIS Shape layer. <br> ERROR 2170 - Number of TIN Line points have exceeded limit of allowable points in GIS Shape layer. | |alt_msg=ERROR 2170 - Exceeded limit of allowable trigger points in a GIS Shape layer. <br> ERROR 2170 - Number of TIN Line points have exceeded limit of allowable points in GIS Shape layer. | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=Exceeded limit of allowable points in GIS Z Line layer. | + | |message_desc=Exceeded limit of allowable points in GIS Z Line layer. The maximum number of points can be increased with the .tcf command <font color="green"><tt>Maximum Points == <number of points></tt></font>, the default is 500,000. The maximum number of points effects the number used in GIS layers referenced by commands such as Create TIN Zpts, Read GIS Z Line, Read GIS Z HX Line, Read GIS Z Shape, Read GIS Variable Z Shape, Read GIS FC Shape and Read GIS Layered FC Shape. If the number of points exceeds the amount specified, an ERROR 2170 occurs and this command needs to be used to increase the maximum number of points. This value can also be lowered to reduce RAM requirements. |
| − | |suggestions= | + | |suggestions=Increase maximum number of points using .tcf command <font color="green"><tt>Maximum Points == <number of points></tt></font> or split input layer. |
|discussion_page=* [[Talk:TUFLOW Message 2170|Discuss Message 2170]] | |discussion_page=* [[Talk:TUFLOW Message 2170|Discuss Message 2170]] | ||
|link3='' | |link3='' | ||
Revision as of 19:30, 16 February 2011
TUFLOW Message
ERROR 2170 - Exceeded limit of allowable points in GIS Z Line or Shape layer.
Alternate Message
ERROR 2170 - Exceeded limit of allowable trigger points in a GIS Shape layer.
ERROR 2170 - Number of TIN Line points have exceeded limit of allowable points in GIS Shape layer.
Message Type
ERROR
Description
Exceeded limit of allowable points in GIS Z Line layer. The maximum number of points can be increased with the .tcf command Maximum Points == <number of points>, the default is 500,000. The maximum number of points effects the number used in GIS layers referenced by commands such as Create TIN Zpts, Read GIS Z Line, Read GIS Z HX Line, Read GIS Z Shape, Read GIS Variable Z Shape, Read GIS FC Shape and Read GIS Layered FC Shape. If the number of points exceeds the amount specified, an ERROR 2170 occurs and this command needs to be used to increase the maximum number of points. This value can also be lowered to reduce RAM requirements.
Suggestions
Increase maximum number of points using .tcf command Maximum Points == <number of points> or split input layer.
| Up |
|---|
 2xxx Messages
|