TUFLOW Message 3037: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Teegan.Burke (talk | contribs) Created page with "{{TUFLOW_Message |tuflow_message=ERROR 3037: Cell area factors must be >= 0.0001. <br> |alt_msg=None |type=ERROR |message_desc=The value of specified Storage Reduction..." |
Teegan.Burke (talk | contribs) No edit summary |
||
| Line 6: | Line 6: | ||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=The value of specified Storage Reduction Factor must be greater than 0.0001 (0.01%). |
|message_desc=The value of specified Storage Reduction Factor must be greater than 0.0001 (0.01%). |
||
|suggestions=The Storage Reduction Factor (SRF) can be used to reduce the storage of 2D cells (for example to model hypothetical filling, or reduced storage from buildings). It is a reduction factor, so if a cell has a SRF value of 0.1, then its storage (surface area) is reduced by 10%. |
|||
|suggestions= |
|||
|discussion_page=* [[Talk:TUFLOW Message 3037|Discuss Message 3037]] |
|discussion_page=* [[Talk:TUFLOW Message 3037|Discuss Message 3037]] |
||
Revision as of 10:21, 20 April 2018
TUFLOW Message
ERROR 3037: Cell area factors must be >= 0.0001.
Alternate Message
None
Message Type
ERROR
Description
The value of specified Storage Reduction Factor must be greater than 0.0001 (0.01%).
Suggestions
The Storage Reduction Factor (SRF) can be used to reduce the storage of 2D cells (for example to model hypothetical filling, or reduced storage from buildings). It is a reduction factor, so if a cell has a SRF value of 0.1, then its storage (surface area) is reduced by 10%.
| Up |
|---|
 3xxx Messages
|