Difference between revisions of "TUFLOW Message 2010"
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
|prelink=[[TUFLOW_Message_2009|Message 2009]] | |prelink=[[TUFLOW_Message_2009|Message 2009]] | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |nextlink=[[ | + | |nextlink=[[TUFLOW_Message_2011|Message 2011]] |
}} | }} | ||
Revision as of 10:47, 12 April 2011
TUFLOW Message
ERROR 2010 - Material ID must be greater than 0 or less than 32767.
Alternate Message
NA
Message Type
ERROR
Description
2D cell has been assigned a material ID (integer) of less than one (1) or greater than 32,767. Material IDs must be within this range. The most common reason for this is using a material value hasn't been specified, in this case the MapInfo default integer of zero (0) is applied.
Suggestions
Specify a valid material ID.
Values that occur when no material ID has been specified, can be selected in MapInfo using Query >> Select
Select from: Desired 2d_mat table
That Satisfy : Material = 0
This should select any 0 or unspecified material IDs.
| Up |
|---|
 2xxx Messages
|