Difference between revisions of "TUFLOW Message 2013"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=2D cell has a zero or negative bed resistance coefficient (eg. a negative Manning's n). Note: TUFLOW Builds prior to August 2000 used default values of C=50, M=40 or n=0.025. | |message_desc=2D cell has a zero or negative bed resistance coefficient (eg. a negative Manning's n). Note: TUFLOW Builds prior to August 2000 used default values of C=50, M=40 or n=0.025. | ||
| − | |suggestions= | + | |suggestions=Specify a positive bed resistance coefficient. |
|discussion_page=* [[Talk:TUFLOW Message 2013|Discuss Message 2013]] | |discussion_page=* [[Talk:TUFLOW Message 2013|Discuss Message 2013]] | ||
|link3='' | |link3='' | ||
Revision as of 18:44, 12 April 2011
TUFLOW Message
ERROR 2013 - Zero or negative bed resistance coefficient found at
Alternate Message
NA
Message Type
ERROR
Description
2D cell has a zero or negative bed resistance coefficient (eg. a negative Manning's n). Note: TUFLOW Builds prior to August 2000 used default values of C=50, M=40 or n=0.025.
Suggestions
Specify a positive bed resistance coefficient.
| Up |
|---|
 2xxx Messages
|