Difference between revisions of "TUFLOW Message 3008"
Jump to navigation
Jump to search
Teegan.Burke (talk | contribs) |
|||
| Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
| − | |tuflow_message=ERROR 3008: nut_m must be >= 0. | + | |tuflow_message=ERROR 3008: nut_m must be >= 0. <br> |
| + | ERROR 3008: nut_c must be >= 0 | ||
<br> | <br> | ||
| − | |alt_msg= | + | |alt_msg= |
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc= | + | |message_desc=When PRANDTL turbulence model is selected, the viscosity is modelled based on the turbulence length scale ''lm'' and the turbulence intensity ''k'' as follows: |
| + | |||
|suggestions=XX. | |suggestions=XX. | ||
Revision as of 13:37, 16 July 2018
TUFLOW Message
ERROR 3008: nut_m must be >= 0.
ERROR 3008: nut_c must be >= 0
Alternate Message
Message Type
ERROR
Description
When PRANDTL turbulence model is selected, the viscosity is modelled based on the turbulence length scale lm and the turbulence intensity k as follows:
Suggestions
XX.
| Up |
|---|
 3xxx Messages
|