Revision as of 11:24, 13 August 2018 view source ShuangGao (talk \| contribs) Bureaucrats, Administrators 1,087 edits No edit summary ← Older edit		Revision as of 12:17, 13 August 2018 view source ShuangGao (talk \| contribs) Bureaucrats, Administrators 1,087 edits No edit summary Newer edit →
Line 28: OUTPUT FILE NONE </pre> If you have checked all the commands are valid but still receive this error, please also check ~~remove~~whether your control files contain any Byte Order Mark ~~from~~(https://en.wikipedia.org/wiki/Byte_order_mark). ~~control~~The Byte Order Mark can be found in some text files to indicate the byte order. The use of Byte Order Mark of is optional, but it may cause command line reading error during TUFLOW pre-processing. An example of UTC-8-BOM encoding file viewed with HEX mode is shown below, and the first 3 characters can prevent TUFLOW from recognising the first line as commented line.<br> [[File:Remove_Byte_Order_Mark_002.PNG]]<br> These Byte Order Marks can be removed using Notepad++, by going ''Encoding'' -> ''Convert to UTF-8'' and save the file. [[File:Remove_Byte_Order_Mark_001.PNG]]<br><br> If unsure about why you receiving this message please contact <font color="blue"><u>support@tuflow.com</u></font> and attach the log file and control file inputs. \|discussion_page=* [[Talk:TUFLOW Message 0013\|Discuss Message 0013]]

TUFLOW Message 0060: Difference between revisions