Difference between revisions of "TUFLOW Message 1343"
Jump to navigation
Jump to search
(Created page with '{{TUFLOW_Message |tuflow_message=ERROR 1343 - In ',A4,1X,a,' table above, Column 1 values not increasing. Values: ',a,' then |alt_msg=NA |type=ERROR |message_desc=???? |sug...') |
Stephen.kime (talk | contribs) |
||
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc= | + | |message_desc=The value in column 1 of the 1d_ta file does not increase as it progresses, as shown in the example below. This is usually the 'X' value for an XZ type table; or 'H' value for a HW type table. |
| − | |suggestions= | + | <br> |
| + | [[File:Non-incremental_HW_Table.png|320px]] | ||
| + | <br> | ||
| + | |suggestions=If there is a stepped increment in the 1d cross-section that you are trying to represent; it is possible to resolve this error by using a small increment of a millimetre between values in column 1 of the 1d_ta file. | ||
|discussion_page=* [[Talk:TUFLOW Message 1343|Discuss Message 1343]] | |discussion_page=* [[Talk:TUFLOW Message 1343|Discuss Message 1343]] | ||
|link3='' | |link3='' | ||
Revision as of 03:49, 29 August 2018
TUFLOW Message
ERROR 1343 - In ',A4,1X,a,' table above, Column 1 values not increasing. Values: ',a,' then
Alternate Message
NA
Message Type
ERROR
Description
The value in column 1 of the 1d_ta file does not increase as it progresses, as shown in the example below. This is usually the 'X' value for an XZ type table; or 'H' value for a HW type table.
Suggestions
If there is a stepped increment in the 1d cross-section that you are trying to represent; it is possible to resolve this error by using a small increment of a millimetre between values in column 1 of the 1d_ta file.
| Up |
|---|
 1xxx Messages
|