TUFLOW Message 2461: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2461 - "Global Rainfall Area Factor" applied after "Global Rainfall BC". |alt_msg=ERROR 2461 - "Global Rainfall Initial Loss" applied af..." |
No edit summary |
||
| Line 15: | Line 15: | ||
|prelink=[[TUFLOW_Message_2460|Message 2460]] |
|prelink=[[TUFLOW_Message_2460|Message 2460]] |
||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
||
|nextlink=[[ |
|nextlink=[[TUFLOW_Message_2508|Message 2508]] |
||
}} |
}} |
||
Revision as of 14:07, 4 October 2018
TUFLOW Message
ERROR 2461 - "Global Rainfall Area Factor" applied after "Global Rainfall BC".
Alternate Message
ERROR 2461 - "Global Rainfall Initial Loss" applied after "Global Rainfall BC".
ERROR 2461 - "Global Rainfall Initial Loss" applied after "Global Rainfall BC".
Message Type
ERROR
Description
The global rainfall commands:
- Global Rainfall Area Factor == <value>
- Global Rainfall Initial Loss == <value>
- Global Rainfall Initial Loss == <value>
should be specified prior to any Global Rainfall BC == <boundary name> command.
Suggestions
Change the order of the commands in the boundary control file (.tbc) to ensure that the rainfall loss and rainfall factor commands occur before the Global Rainfall BC == <boundary name> command.
| Up |
|---|
 2xxx Messages
|