Difference between revisions of "TUFLOW Message 0255"
| Line 10: | Line 10: | ||
|prelink=[[TUFLOW_Message_0254|Message 0254]] | |prelink=[[TUFLOW_Message_0254|Message 0254]] | ||
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]] | |uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]] | ||
| − | |nextlink=[[ | + | |nextlink=[[TUFLOW_Message_0300|Message 0300]] |
}} | }} | ||
Revision as of 14:17, 9 October 2018
TUFLOW Message
WARNING 0255 - One or more GIS layers not closed during simulation - please notify support@tuflow.com.
Alternate Message
NA
Message Type
WARNING
Description
This warning is a cross-check on any GIS layers (input or output) that were not closed off immediately after they were completed, but were closed off at the end of the simulation. Please email support@tuflow.com with the .tlf file attached if this message occurs. The GIS layers are closed off neatly as part of this check and the occurrence of this message should not affect the simulation or the outputs in any way.
Suggestions
No action required other than to email support@tuflow.com with the .tlf file so that the development team can identify the layers not closed off.
| Up |
|---|
 0xxx Messages
|