Revision as of 11:53, 10 August 2011 view source Bill Syme (talk \| contribs) Bureaucrats, Administrators 461 edits No edit summary ← Older edit		Revision as of 11:54, 10 August 2011 view source Bill Syme (talk \| contribs) Bureaucrats, Administrators 461 edits No edit summary Newer edit →
Line 5: \|message_desc=A <font color="green"><tt>BC Database </tt></font>command must occur prior to any 1D (.ecf) and 2D (.tbc) <font color="green"><tt>Read GIS BC </tt></font>command(s). The reason for this is that <font color="green"><tt>BC Database </tt></font> can be specified any number of times, with the most recent occurrence being used to set the active database when a <font color="green"><tt>Read GIS BC </tt></font> command occurs. This was used by modellers as a way of applying different events/ or probabilities to different boundaries. If using the 2010-10 release or later, it is recommended to switch to the new event management feature as this is much more flexible and intuitive (see Section 4.12 in the 2010-10 TUFLOW Manual). \|suggestions=Check the <font color="green"><tt>BC Database </tt></font>command occurs before any <font color="green"><tt>Read GIS BC </tt></font> commands. If there is no <font color="green"><tt>BC Database </tt></font>command one will need to be specified (unless there are no boundaries, ie. no <font color="green"><tt>Read GIS BC </tt></font> commands). \|discussion_page=* [[Talk:TUFLOW Message 0100\|Discuss Message 0100]]

TUFLOW Message 0100: Difference between revisions