TUFLOW Viewer

THIS PAGE IS CURRENTLY UNDER CONSTRUCTION

Loading Results

Option 1

File >> Load Results

Option 2

Right Click in Open Results >> Load Results

There are 3 options for loading in results:

1. Load Results --> This is done via a TCF or FVC file and will load in all results (Map Outputs and Time Series)
2. Load Results - Map Outputs --> Select map output mesh results file (*.xmdf, *.dat, *.2dm, *.xmdf.sup, *.dat.sup)
3. Load Results - Time Series --> Select time series output results (*.tpc)

Changing Result Type

As simple as selecting a different result type in Result Type panel. You can only display one Scalar results and one Vector result at any given time.

File:ChangingResultType.gif

Showing Maximum

Option 1

Click the double up arrow next to the result type

Option 2

Right click the result type >> Check on Maximum

File:ToggleMax.gif

Showing Vectors

Select one of the Vector result types in the Result Types panel


File:ToggleVectors.gif

Styling Layer

Option 1

Right Click mesh layer in Layers Panel >> Properties... >> Navigate to the Contour Tab at the top >> Select Colour Ramp in drop down box >> Click Load >> Click OK

Option 2

Right Click result type in Result Type Panel >> Properties... >> Navigate to the Contour Tab at the top >> Select Colour Ramp in drop down box >> Click Load >> Click OK

File:ChangeStyles.gif

Saving Default Style

Saving a default style for a result type will mean that every time a result type of that name e.g 'Depth' is loaded, TUFLOW Viewer will automatically apply that style.

There are 2 options:

1. Save Colour Ramp --> This will save the particular colour ramp as default. This means the actual min / max values will be adjusted based on the results. This is useful for results such as Bed Elevation or Water Level where the ranges are usually different depending on the model's location
2. Save Colour Map --> This will save the exact values and associated colours used in the styling. This might be useful for results such as Depth or Velocity where a template can be applicable across different models

Right Click the result type >> Save Style As Default >> Colour Ramp

File:SavingDefaultStyles.gif

Plotting From Map Outputs

Time Series

You can plot one or multiple temporal map output results as a time series.

1. Choose which map outputs to plot >> click on the time series graph down arrow under Map Output Plotting >> Check on desired result types
2. Click off the menu
3. Click the time series graph again (not the down arrow)
4. Click somewhere on your results

File:MapOutputPlotting TS.gif