Difference between revisions of "TUFLOW Message 2787"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[WARNING]] | |type=[[WARNING]] | ||
| − | |message_desc=This warning occurs for TUFLOW HPC simulations when SA | + | |message_desc=This warning occurs for TUFLOW HPC simulations when SA ALL option is turned on because the "Defaults" command are set prior to 2017. |
| − | |suggestions=TUFLOW HPC was only released in 2017. | + | |suggestions=TUFLOW HPC was only released in 2017. Please check if it is intentional to apply default settings prior to 2017 for TUFLOW HPC simulations. |
|discussion_page=* [[Talk:TUFLOW Message 2787|Discuss Message 2787]] | |discussion_page=* [[Talk:TUFLOW Message 2787|Discuss Message 2787]] | ||
|link3='' | |link3='' | ||
Revision as of 11:48, 2 July 2019
TUFLOW Message
WARNING 2787 - SA boundary applied as SA ALL due to use of "Defaults" command.
Alternate Message
NA
Message Type
WARNING
Description
This warning occurs for TUFLOW HPC simulations when SA ALL option is turned on because the "Defaults" command are set prior to 2017.
Suggestions
TUFLOW HPC was only released in 2017. Please check if it is intentional to apply default settings prior to 2017 for TUFLOW HPC simulations.
| Up |
|---|
 2xxx Messages
|