Revision as of 00:56, 24 September 2019 view source Tuflowduncan (talk \| contribs) Bureaucrats, Administrators 1,210 edits →Introduction ← Older edit		Revision as of 01:01, 24 September 2019 view source Tuflowduncan (talk \| contribs) Bureaucrats, Administrators 1,210 edits →Checking whether a X1DH or X1DQ Setup has been Successful Newer edit →
Line 32: The first location to look for confirmation that a X1DQ or X1DH connection has been picked up is to look into the simulation tlf file. This will list the number of X1DQ and X1DH connections to the Flood Modeller network. [[File:Tlf.png\|thumb\|Border\|none\|700px\|~~Figure 4:~~ Figure x: TLF Files showing successful activation of X1DQ connection to Flood Modeller node DB_2436.]] The type or existence of a connection can be also be checked by viewing the Conn_1D_2D attribute in the 1d_nwk_N_ check layer. [[File:1d nwk N Check.png\|thumb\|border\|none\|700px\|Figure xX: 1d_nwk_N_ check layer showing successful activation of X1DQ connection. ]] The _messages.mif/.shp layer contains CHECK 1393 messages at each ESTRY node linked to a Flood Modeller node. The presence of this message indicates that that the TUFLOW 1D (ESTRY) node has been successfully connected to a Flood Modeller node and therefore no action is required. [[File:Messages.png\|thumb\|border\|none\|700px\|Figure x: _messages layer showing successful activation of X1DQ connection.]] ==Interrogating Results for a Flood Modeller-TUFLOW 1D Link==

TUFLOW 1D Flood Modeller Connectivity: Difference between revisions