TUFLOW 1D Flood Modeller Connectivity: Difference between revisions
Content deleted Content added
Tuflowduncan (talk | contribs) |
Tuflowduncan (talk | contribs) No edit summary |
||
Line 1:
<br>
=Introduction=
TUFLOW models can be configured with Flood Modeller to allow dynamically linked models comprising 1D pipe networks, represented in ESTRY (aka TUFLOW 1D), open channels represented in Flood Modeller Pro and/or
There are two types of linking:-
Line 15 ⟶ 13:
An X1DQ might be more appropriate where a Flood Modeller model stops and flows into an ESTRY model. The water level calculated by TUFLOW is applied as a time-varying head boundary in Flood Modeller. The Flood Modeller 1D node on the end of an X1DQ connection must be an HTBDY unit. This does not need to contain any boundary data as this data will be overridden by the water levels provided by TUFLOW.
[[File:X1DQ Example.PNG|thumb|Border|none|700px|Figure 2: Flood Modeller Open Channel Discharging into
'''NOTE: Remember that the Flood Modeller node ID is Case Sensitive.'''
| |||