Revision as of 09:01, 23 September 2020 view source ShuangGao (talk \| contribs) Bureaucrats, Administrators 1,087 edits No edit summary ← Older edit		Revision as of 09:24, 23 September 2020 view source ShuangGao (talk \| contribs) Bureaucrats, Administrators 1,087 edits No edit summary Newer edit →
Line 5: \|type=[[CHECK]] \|message_desc=SGS model needs to insure every cell face elevation is NOT lower than the minimum cell centre elevations on both sides. The warning suggest discontinuity in sub-grid elevation, which can happen occasionally during pre-processing of Sub-Grid Sampling. If this happens, the cell face elevation will be increased automatically to insure simulation stability. \|suggestions=Check in _message_p layer where this is happening and which Zpts command is causing this. If the input layers are all correctly set, ~~you can also~~ turn "<font color="blue"><tt>SGS Face Elevation Warning</tt></font> <font color="red"><tt>==</tt></font> <tt>OFF</tt>" to omit this warning message. \|discussion_page=* [[Talk:TUFLOW Message 3520\|Discuss Message 3520]] \|link3=''

TUFLOW Message 3520: Difference between revisions