1D Manholes: Difference between revisions
Content deleted Content added
Tuflowduncan (talk | contribs) |
Tuflowduncan (talk | contribs) |
||
Line 186:
The conduits are the same shape and the same dimensions but have different invert levels as specified in the table below. All parameters for the manhole and other parts of the network are identical.
The resulting simulated loss values are presented in Figure 8.
<br>
[[File:Manhole Results 3.png]]
<br>
'''Figure 8: Example Model 3 Results-loss Coefficients'''
<br>
===Example 3 - Entry Losses===
Line 195 ⟶ 201:
[[File:K entry3.PNG]]
This matches the losses for both incoming pipes as shown in figure
===Example 3 - Exit Losses===
A'<sub>m</sub> is 3.57m<sup>2</sup> respectively. Therefore, K<sup>exit</sup>:[[File:K exit3.PNG]]
The calculated losses match the losses calculated by the TUFLOW presented in Figure 8.
===Example 3 - Outgoing Conduit Losses===
Line 218 ⟶ 224:
Therefore, K<sub>outletpipe</sub> is: [[File:K outletpipe3.PNG]]
The calculated value matches that presented in figure
=Storage chambers=
| |||