InfoWorks ICM to TUFLOW: Difference between revisions
Content deleted Content added
Tuflowduncan (talk | contribs) |
Tuflowduncan (talk | contribs) |
||
Line 52:
|1D Node ||Node||1d_mh_pit||Headloss Approach is assumed to be TUFLOW’s default Engelund approach.
|-
|1D Pipes ||Conduit||1d_nwk_pipe||Conduit shape ‘CIRC’ are set as Type ‘C’ and shape ‘RECT’ are set as type ‘R’, otherwise the conduit shape is set to I. Where ‘I’, the shape will need separately defining. Conduit Width/Height are converted from ‘mm’ to ‘m’. Manning's n roughness value are copied if roughness type is 'N'.
|-
|1D Subcatchment ||Subcatchment||1d_sa_subcatchment||Only the Geometry is exported.
Line 66:
| Flap Valve||1d_nwk_Flap_Valve||Converted to a circular, uni-directional conduit.
|-
| Flume||1d_nwk_Flume||Geometry exported but no direct equivalent in TUFLOW currently. If flume type is 'RFLUME' exported to Rectangular conduit otherwise set to 'I'.
|-
| Inline Bank||1d_nwk_Inline_Bank||Imported as an irregular weir. Section data needs bringing across.
| |||