Tuflow

TUFLOW Message 3520: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
No edit summary
No edit summary
Line 5:
|type=[[CHECK]]
|message_desc=SGS model needs to insure every cell face elevation is NOT lower than the minimum cell centre elevations on both sides. The warning suggest discontinuity in sub-grid elevation, which can happen occasionally during pre-processing of Sub-Grid Sampling. If this happens, the cell face elevation will be increased automatically to insure simulation stability.
|suggestions=CheckAlthough inTUFLOW _message_pautomatically layercorrect wherethe thisface iselevations, happeningusers andcan whichturn Zpts"<font commandcolor="blue"><tt>SGS Face Elevation Warning</tt></font> <font color="red"><tt>==</tt></font> <tt>ON</tt>" (the default is causing"<tt>OFF</tt>") thisto report every faces with the issue to the _message_p layer. If the geometries input layers are all correctly set around these faces, turn "<font color="blue"><tt>SGS Face Elevation Warning</tt></font> <font color="red"><tt>==</tt></font> <tt>OFF</tt>" to omit this warning message.
|discussion_page=* [[Talk:TUFLOW Message 3520|Discuss Message 3520]]
|link3=''
Retrieved from "https://wiki.tuflow.com/TUFLOW_Message_3520"