Difference between revisions of "TUFLOW Message 0120"
Jump to navigation
Jump to search
Chris Huxley (talk | contribs) |
|||
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc= The boundary condition ID in GIS 2d_bc file could not be found in the boundary condition database csv file. | |message_desc= The boundary condition ID in GIS 2d_bc file could not be found in the boundary condition database csv file. | ||
| − | |suggestions= Check the names in the 2d_bc file and the | + | |suggestions= Check the names in the 2d_bc file and the bc_dbase.csv are consistent. <br> |
This error is common if a user has mistakenly used either a 2d_bc template file in combination with the command "Read GIS SA =="; or the 2d_sa template file in combination with the Read GIS BC == command. Check that the correct template file is matched with the correct command. 2d_sa should be used with Read GIS SA ==, 2d_bc should be used with Read GIS BC ==. | This error is common if a user has mistakenly used either a 2d_bc template file in combination with the command "Read GIS SA =="; or the 2d_sa template file in combination with the Read GIS BC == command. Check that the correct template file is matched with the correct command. 2d_sa should be used with Read GIS SA ==, 2d_bc should be used with Read GIS BC ==. | ||
|discussion_page=* [[Talk:TUFLOW Message 0120|Discuss Message 0120]] | |discussion_page=* [[Talk:TUFLOW Message 0120|Discuss Message 0120]] | ||
Revision as of 14:01, 16 September 2021
TUFLOW Message
ERROR 0120 - Could not find ",a," in database ",a,
Alternate Message
NA
Message Type
ERROR
Description
The boundary condition ID in GIS 2d_bc file could not be found in the boundary condition database csv file.
Suggestions
Check the names in the 2d_bc file and the bc_dbase.csv are consistent.
This error is common if a user has mistakenly used either a 2d_bc template file in combination with the command "Read GIS SA =="; or the 2d_sa template file in combination with the Read GIS BC == command. Check that the correct template file is matched with the correct command. 2d_sa should be used with Read GIS SA ==, 2d_bc should be used with Read GIS BC ==.
| Up |
|---|
 0xxx Messages
|