1D Integrity Tool - Flow Trace: Difference between revisions
Content deleted Content added
Ellis Symons (talk | contribs) |
Ellis Symons (talk | contribs) |
||
Line 29:
<li> '''Generate Long Plots''' - Creates an interactive plotting window with long plots to help visualise the network. The outputs from the continuity check will also be flagged in the long plot. The behaviour of the tool can be modified depending on the number of channels initially selected when the tool is run:
<ul>
<li> One channel selected - will select all upstream network objects and generate a long plot for each unique network branch (e.g. if the pipe system splits upstream of the selected channel, a long plot will be generated for both
<li> Two channels selected - will try and connect the selected channels and perform a continuity check only between the selected channels. If channels are not connected, the tool will produce an error message. This is useful to check whether 2 channels are connected and also to focus on a particular branch or section of the network.
<li> Three or more channels selected - similar to when two channels are selected, but will generate an extra branch for each extra channel selected (e.g. selecting 3 channels will create 2 branches starting from the most downstream channel). Currently 5 selected channels is the upper limit to stop this from accidentally being triggered for too many branches.
| |||