1D Integrity Tool - Tutorial: Difference between revisions

2. From the '''Integrity_Tool_Tutorial\DatafolderData''' folder''' load the '''1d_nwk_MI01_Pipes_001_L.shp''' , '''1d_nwk_MI01_Pipes_001_L.shp''' and '''dem_DEV_EG07.asc''' into QGIS.<br>

*'''1. Input Network Lines''' - inputInput location of 1d_nwk lines such as pipes, culverts, and open channels. Use dropdown box and '+' button to add layers as inputs to tool.<br>

*'''2. Input Network Points''' - inputInput location of 1d_nwk points such as pits and nodes. Use dropdown box and '+' button to add layers as inputs to tool.<br>

*'''3. Input Tables''' - inputInput location of 1d_ta lines such as 1d_xs, 1d_cs, and 1d_hw. Use dropdown box and '+' button to add layers as inputs to tool.<br>

*'''4. Input DEM''' - inputInput raster. Currently only 1 input is supported, so if you are using tiled rasters datasets, they would need to be mosaiced into a single raster prior to running the tool.<br>

*'''5. Tool Selection''' - theThe active tab will determine the active tool. Prior to plugin version 3.2 a radio button was used to select the active tool. See [[#Tool_Documentation|Tool Documentation]] for information on each tool.<br>

*'''6. Status Bar''' - containsContains the progress bar and status of the integrity tool. Includes information such as the current active task being performed (if one of the tools is running), and the status of the previously run tool.<br>

*'''7. Run''' - runsRuns the currently active tool (active tool determined by the current active tool tab - prior to plugin version 3.2 a radio button was used to select the active tool).<br>

This meanswill mean we will be undertaking the integrity tests on this layer. We could also use the integrity tools on point layers and/or Cross-section/Height-Width tables, but for the purpose of this demonstration we will only use the network line layers.