Difference between revisions of "TUFLOW Message 1207"
Jump to navigation
Jump to search
Steph.dufour (talk | contribs) |
|||
| Line 3: | Line 3: | ||
|alt_msg=N/A | |alt_msg=N/A | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=For manually specified manholes, the manhole type has been left blank and the default setting using the command '''Manhole Default Type ==''' is set to CR or CJR. | + | |message_desc=For manually specified manholes, the manhole type has been left blank and the default setting using the command '''<font color="blue"><tt>Manhole Default Type </tt></font><font color="red"><tt>== </tt></font>''' is set to CR or CJR. |
| − | |suggestions='''Manhole Default Type ==''' must be set to C, J or R. The CR and CJR options cannot be used noting that CJR is the default. | + | |suggestions='''<font color="blue"><tt>Manhole Default Type </tt></font><font color="red"><tt>== </tt></font>''' must be set to C, J or R. The CR and CJR options cannot be used noting that CJR is the default. |
|discussion_page=* [[Talk:TUFLOW Message 1207|Discuss Message 1207]] | |discussion_page=* [[Talk:TUFLOW Message 1207|Discuss Message 1207]] | ||
|link3='' | |link3='' | ||
Revision as of 15:04, 23 June 2022
TUFLOW Message
ERROR 1207 - Default manhole type for digitised manholes with blank Type must be C, J or R.
Alternate Message
N/A
Message Type
ERROR
Description
For manually specified manholes, the manhole type has been left blank and the default setting using the command Manhole Default Type == is set to CR or CJR.
Suggestions
Manhole Default Type == must be set to C, J or R. The CR and CJR options cannot be used noting that CJR is the default.
| Up |
|---|
 1xxx Messages
|