TUFLOW Message 1999: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Created page with "{{TUFLOW_Message |tuflow_message=ERROR 1998 - Water level of <water level> exceeds range in Channel <channel ID> at <time>. |alt_msg=N/A |type=ERROR |message_desc=The wate..." |
No edit summary |
||
| Line 3: | Line 3: | ||
|alt_msg=N/A |
|alt_msg=N/A |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=The water level in a 1D channel has exceeded the instability water level for the channel. The default instability water level is 10 times the maximum depth in the cross-section for the channel. This can be modified with the .ecf command: "<tt>Depth Limit Factor == </tt>". This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number). |
|message_desc=The water level in a 1D channel has exceeded the instability water level for the channel. The default instability water level is 10 times the maximum depth in the cross-section for the channel. This can be modified with the .ecf command: "<tt><font color="blue">Depth Limit Factor </font><font color="red">== </font></tt>". This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number). |
||
|suggestions=Please refer to Section 14.3 of the 2016 TUFLOW manual for tips on finding the start of an instability. |
|suggestions=Please refer to Section 14.3 of the 2016 TUFLOW manual for tips on finding the start of an instability. |
||
|discussion_page=* [[Talk:TUFLOW Message 1999|Discuss Message 1999]] |
|discussion_page=* [[Talk:TUFLOW Message 1999|Discuss Message 1999]] |
||
Revision as of 08:52, 24 June 2022
TUFLOW Message
ERROR 1998 - Water level of <water level> exceeds range in Channel <channel ID> at
Alternate Message
N/A
Message Type
ERROR
Description
The water level in a 1D channel has exceeded the instability water level for the channel. The default instability water level is 10 times the maximum depth in the cross-section for the channel. This can be modified with the .ecf command: "Depth Limit Factor == ". This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number).
Suggestions
Please refer to Section 14.3 of the 2016 TUFLOW manual for tips on finding the start of an instability.
| Up |
|---|
 1xxx Messages
|