TUFLOW Message 2022: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{TUFLOW_Message |
{{TUFLOW_Message |
||
|tuflow_message=ERROR 2022 - Can only use nearest to line oblique boundary alignment for 2D BC if "<font color="blue"><tt>Oblique Boundary Method </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt>ON</tt></font> |
|tuflow_message=ERROR 2022 - Can only use nearest to line oblique boundary alignment for 2D BC if "<font color="blue"><tt>Oblique Boundary Method </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt>ON</tt></font>" |
||
|alt_msg=NA |
|alt_msg=NA |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
Revision as of 09:03, 24 June 2022
TUFLOW Message
ERROR 2022 - Can only use nearest to line oblique boundary alignment for 2D BC if "Oblique Boundary Method == ON"
Alternate Message
NA
Message Type
ERROR
Description
Can only use Oblique Boundary Alignment == NEAREST TO LINE for 2D BC if Oblique Boundary Method == ON.
As of Build 2006-06-AA, this command is considered redundant (other than for backward compatibility), as the Method C or D (Boundary Cell Selection and Line Cell Selection) ensures that the same cells are selected along both HX lines and Z lines.
Suggestions
If using a build of TUFLOW prior to 2006-06-AA and using the Oblique Boundary Alignment == NEAREST TO LINE command, ensure that the Oblique Boundary Method == ON command is also used.
| Up |
|---|
 2xxx Messages
|