Difference between revisions of "TUFLOW Message 0020"

From Tuflow
Jump to navigation Jump to search
Line 9: Line 9:
 
Note: -s and -s1 are treated as being the same, therefore this message will occur if -s and -s1 are specified.  Similarly for -e and -e1.  If multiple scenarios or events are to be simulated <tt>-e1 <event1> -e2 <event2> or  -s1 <scenario1> -s2 <scenario2></tt> can be used.  Up to 9 events and scenarios can be specified for a single simulation (although this would be vary rare!)
 
Note: -s and -s1 are treated as being the same, therefore this message will occur if -s and -s1 are specified.  Similarly for -e and -e1.  If multiple scenarios or events are to be simulated <tt>-e1 <event1> -e2 <event2> or  -s1 <scenario1> -s2 <scenario2></tt> can be used.  Up to 9 events and scenarios can be specified for a single simulation (although this would be vary rare!)
 
|suggestions=Check and correct the repeat occurrences of the -e or -s option(s).
 
|suggestions=Check and correct the repeat occurrences of the -e or -s option(s).
|discussion_page=* [[Talk:TUFLOW Message 0020|Discuss Message 0020]]
+
<br>
|link3=''
 
|link4=''
 
 
|prelink=[[TUFLOW_Message_0015|Message 0015]]
 
|prelink=[[TUFLOW_Message_0015|Message 0015]]
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
 
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
 
|nextlink=[[TUFLOW_Message_0021|Message 0021]]
 
|nextlink=[[TUFLOW_Message_0021|Message 0021]]
 
}}
 
}}

Revision as of 12:00, 1 July 2022

TUFLOW Message
ERROR 0020 - Event/Scenario name already specified for -e/-s option.

Alternate Message
NA

Message Type
ERROR

Description
This ERROR occurs when the -e or -s option occurs for the same ID.

For example, if "-s1 exg -s1 OpA -s2 OpB" is specified when running TUFLOW, s1 has occurred twice, and therefore the intent is unclear.

Note: -s and -s1 are treated as being the same, therefore this message will occur if -s and -s1 are specified. Similarly for -e and -e1. If multiple scenarios or events are to be simulated -e1 <event1> -e2 <event2> or -s1 <scenario1> -s2 <scenario2> can be used. Up to 9 events and scenarios can be specified for a single simulation (although this would be vary rare!)

Suggestions
Check and correct the repeat occurrences of the -e or -s option(s).


Up
Go-up.png 0xxx Messages