Difference between revisions of "TUFLOW Message 1002"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
|message_desc=No boundary condition found for node "a". | |message_desc=No boundary condition found for node "a". | ||
|suggestions=Check if the "Name" attribute is specified in the 1d_bc GIS layer and if there is corresponding data in the boundary database. | |suggestions=Check if the "Name" attribute is specified in the 1d_bc GIS layer and if there is corresponding data in the boundary database. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_1001|Message 1001]] | |prelink=[[TUFLOW_Message_1001|Message 1001]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_1003|Message 1003]] | |nextlink=[[TUFLOW_Message_1003|Message 1003]] | ||
}} | }} | ||
Revision as of 15:40, 1 July 2022
TUFLOW Message
ERROR 1002 - No boundary condition found for node "a".
Alternate Message
NA
Message Type
ERROR
Description
No boundary condition found for node "a".
Suggestions
Check if the "Name" attribute is specified in the 1d_bc GIS layer and if there is corresponding data in the boundary database.
| Up |
|---|
 1xxx Messages
|