TUFLOW Message 1032: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|message_desc=Cross section properties can't be interpolated. |
|message_desc=Cross section properties can't be interpolated. |
||
|suggestions=Use a connector (X) at junctions for side branches to indicate main branch. |
|suggestions=Use a connector (X) at junctions for side branches to indicate main branch. |
||
|discussion_page=* [[Talk:TUFLOW Message 1032|Discuss Message 1032]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_1031|Message 1031]] |
|prelink=[[TUFLOW_Message_1031|Message 1031]] |
||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
||
Revision as of 15:54, 1 July 2022
TUFLOW Message
ERROR 1032 - Branch splits downstream of channel ",a," at Node ",a,". Could not interpolate cross-section properties.
Alternate Message
ERROR 1032 - Branch splits upstream of channel ",a," at Node ",a,". Could not interpolate cross-section properties.
Message Type
ERROR
Description
Cross section properties can't be interpolated.
Suggestions
Use a connector (X) at junctions for side branches to indicate main branch.
| Up |
|---|
 1xxx Messages
|