TUFLOW Message 1037: Difference between revisions
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
Interpolated cross-section properties can be found in <''runfile_''1d_ta_tables_check.csv> which is written with the 1D check files location as specified with the .ecf command <font color="blue"><tt>Write Check Files </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt><location></tt></font> |
Interpolated cross-section properties can be found in <''runfile_''1d_ta_tables_check.csv> which is written with the 1D check files location as specified with the .ecf command <font color="blue"><tt>Write Check Files </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt><location></tt></font> |
||
|discussion_page=* [[Talk:TUFLOW Message 1037|Discuss Message 1037]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_1036|Message 1036]] |
|prelink=[[TUFLOW_Message_1036|Message 1036]] |
||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
||
Revision as of 15:56, 1 July 2022
TUFLOW Message
CHECK 1037 - Channel <channel ID> interpolated from XS <cross-section 1> (<weighting for cross-section 1> as %) and XS <cross-section 2> (<weighting for cross-section 2> as %).
Alternate Message
NA
Message Type
CHECK
Description
A channel cross-section has not been specified, cross-sectional properties interpolated from upstream and downstream cross-sections listed. Weighting for interpolation are listed.
Cross section interpolation can be globally turned off, forcing each channel to have a cross-section specified. This is done with the .ecf command: Interpolate Cross-Sections == OFF.
Suggestions
Check if interpolatted cross-section is desired in this location.
Interpolated cross-section properties can be found in <runfile_1d_ta_tables_check.csv> which is written with the 1D check files location as specified with the .ecf command Write Check Files == <location>
| Up |
|---|
 1xxx Messages
|