Difference between revisions of "TUFLOW Message 1105"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
|message_desc=Width and/or height of rectangular culvert (R type channel) is less than or equal to zero. | |message_desc=Width and/or height of rectangular culvert (R type channel) is less than or equal to zero. | ||
|suggestions=Enter a valid width into Width_or_Dia and a height into Height_or_WF GIS attributes. These are fields 14 and 15 in 1d_nwk layer, values in metres. | |suggestions=Enter a valid width into Width_or_Dia and a height into Height_or_WF GIS attributes. These are fields 14 and 15 in 1d_nwk layer, values in metres. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_1104|Message 1104]] | |prelink=[[TUFLOW_Message_1104|Message 1104]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_1106|Message 1106]] | |nextlink=[[TUFLOW_Message_1106|Message 1106]] | ||
}} | }} | ||
Revision as of 16:34, 1 July 2022
TUFLOW Message
ERROR 1105 - Width and/or height of R culvert is less than or equal to zero.
Alternate Message
NA
Message Type
ERROR
Description
Width and/or height of rectangular culvert (R type channel) is less than or equal to zero.
Suggestions
Enter a valid width into Width_or_Dia and a height into Height_or_WF GIS attributes. These are fields 14 and 15 in 1d_nwk layer, values in metres.
| Up |
|---|
 1xxx Messages
|